Avicon 50A S-Bec Brushless Esc

D-Power AVICON 50A S-BEC Brushless ESC

The AVICON series from D-Power is a brushless ESC series of the latest MOSFET generation and has been specially developed for model aircraft. Compact dimensions, a relatively low weight, convincing starting and throttle linearities and extremely high reliability characterize this ESC series.

The AVICON controllers are equipped with a powerful 32-bit microprocessor as standard, which ensures strong computing power and ultra-faster processing rates. The controllers can be conveniently adjusted with the optional PROGCON programming card, as well as directly with the remote control control.

The brushless ESCs also support almost all motors with high speeds, as they are common today.

The AVICON controllers are available with 20A, 30A, 40A, 50A, 60A, 80A and 100A.

Thrust reverser at the touch of a button The SMR function on the regulator must be turned on. After that, the fourth pin of the servo cable can be plugged into a free slot on the receiver. If the channel is operated via a switch, the motor turns the other way around. Attention: the throttle position must be below 50%. The function may only be used on the ground for braking - never in the air. Otherwise, there is a risk that the controller will burn out and the model will be lost.

Features: • Next-generation high-performance MOSFETs with low heat signature, high peak current threshold, and high reliability • Powerful 32-bit microprocessor • Super smooth starting and throttling over the entire power range • Extremely low internal resistance • High efficiency and great energy saving • Adjustable SBEC output voltage (5V/6V) • Multiple protection protocols: start-up, overheating, undervoltage cut-off, signal loss, phase loss, etc. • Fully programmable via the optional D-Power PROGCON LCD programming board

Technical data AVICON 50A:

• Current permanent: 50A

• Current short-term: 65A

• Number of LiPo cells: 2-4S

• Number of NiXX cells: 5-12S

• BEC Output: 5V/6V 4A

• Dimensions: 68 x 25 x 10 mm

• Weight: 37g