An ideal power unit for 2M E-RES gliders with slim fuselage.
Small diameter outrunner brushless electric motor for model aeroplanes: glider 450g, trainer 450g, acro 400g, KV1600 RPM/V, input voltage 2-3S Lixx. 3.0mm shaft.
| Powering LiXX cells | 2 - 3 |
| RPM/V [ot./min/V] | 1600 |
| Max. power (180 s) [W] | 220 |
| Internal resistance [mOhm] | 106 |
| Open-circuit current (při 10 V) [mA] | 620 |
| Max. peak current (180 s) [A] | 23 |
| Diameter [mm] | 22 |
| Length [mm] | 25 |
| Length celková [mm] | 40 |
| Shaft diameter [mm] | 3 |
| Weight [g] | 34.5 |
| Poles count | 14 |
| Timing [°] | 15 - 25 |
| ESC [A] | 25 - 30 |
| Weight of glider (up-to) [g] | 450 |
| Weight of trainer (up-to) [g] | 450 |
| Weight of acrobat (up-to) [g] | 400 |
| Weight of 3D (up-to) [g] | 330 |
KAVAN PRO 2225-1600
KAVAN PRO 2225-1600 is a small diameter miniature motor for lightweight model aeroplanes up to 450 g all-up weight powered by 2-3S LiPo flight battery pack. The motor has been specially designed with slim fuselage 2M E-RES contest gliders like KAVAN MIRAI or MIRAI V in mind. It could also be used for “electrification” of rubber powered planes from of Guillow’s or Dumas kits (up to 1200 mm wingspan), it works great with indoor models, Dumas RC park-flyer kits and similar.
Motor installation: KAVAN 2225-1600 has been designed for the front mount installation only. Use at least two (opposite) or four M2.5 screws; these may not go deeper than 3-4 mm into the front case. The firewall should be made of 2.0 mm plywood.
The motor set contents: KAVAN PRO 2225-1600 motor w. cables (no connectors).
https://www.kavanrc.com/en/item/kavan-brushless-motor-pro-2225-1600-153935
Alternative produkter
Kunder som så på dette så også på
Relaterte produkter
