HBL575SL (0.07s/60°, 16.8kg.cm)

Very high torque/super high speed 53g HV digital brushless low profile standard servo w. metal gears; wide input voltage range 4.8-8.4V, 2xBB. Ideal for 1/10 RC cars. Torque 10.4kg.cm, speed 0.10s/60° at 4.8V, torque 13.3kg.cm, speed 0.08s/60° at 6.0V, torque 16.8kg.cm, speed 0.07s/60° at 7.4V. Aluminium case w. CNC milled heatsink for perfect heat dissipation. Dimensions 40.5x20.5x23.1mm, weight 53.51g. Programmable with DSP-1 programmer.

Very high torque/super high speed programmable digital low-profile standard brushless servo with metal gears and twin ballraced output shaft; ideal for 1/10 RC cars. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads.

Wide input voltage range 4.8-7.4 V (nominal), operational 4.8-8.4 V.

Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.